A clean green sweep: an aquatic bioremediation project Teach article

Vered Yephlach-Wiskerman introduces a classroom project to investigate the bioremediation powers of the aquatic fern Azolla.

Azolla pinnata
Image courtesy of 澎湖小雲雀;
image source: Flickr

When soils or aquatic bodies are contaminated, for example with heavy metals, solvents or oil, one important cleaning option is bioremediation: the use of micro-organisms or plants that will take up the contaminants and either metabolise them into less harmful compounds or accumulate them, allowing them to be removed.

Common applications include cleaning up abandoned mining sites or oil spills. Phytoremediation (from the Greek phyto – plant) uses a plant’s natural ability to contain, degrade or remove toxic chemicals and pollutants from soil or sludge, sediment or ground water.

Azolla is one such plant: this genus of floating freshwater ferns accumulates heavy metals such as nickel, cadmium and mercury (Arora et al., 2006); its biomass is easy to harvest and desiccates very fast (Wagner, 1997). These characteristics make it a perfect candidate for bioremediation systems (Cohen, 2004), although it is always important to assess the potential impact of introducing a new species into an ecosystemw1, w2. Azolla lives in symbiosis with the cyanobacteria Anabaena azollae, which can fix atmospheric nitrogen. This independence of a further external source of nitrogen allows the fern to double its biomass every two to three days at room temperature and is the reason that it has been used in China as a biofertiliser in rice paddies for centuries.

Azolla in the science classroom

Azolla filiculoides
Image courtesy of eyeweed;
image source: Flickr

The plant is a great tool for interdisciplinary school projects involving ecology, environmental studies, biology, chemistry and biotechnology. During such a project, students can develop essential skills for scientific work: formulating a problem and a hypothesis, planning an experiment, writing up the results and drawing conclusions.

Azolla filiculoides (left) and
Azolla pinnata (right)

Image courtesy of eyeweed;
image source: Flickr

In the lesson, introduce the topic of bioremediation and have the students collect information about Azollaw1, w3, w4, w5, w6, w7, w8 (Arora & Saxena, 2005), such as the morphology of water plants as opposed to land plants, the importance of symbiosis, the nitrogen cycle, the use of Azolla in agriculture (Pabby et al., 2004), and Azolla’s ability to absorb heavy metals.

Help the students to formulate the research questions and hypotheses that they would like to investigate. Possible topics include measuring the gain in biomass depending on growth conditions (e.g. CO2 level, iron level in the water, amount of light), or the effect of Azolla on water quality.

Teams of two to three students work well, and each experiment should be repeated three times for confirmation. Different teams can work on different aspects of the plant or on the same topic to replicate a single experiment. In the final session, the results can be presented and discussed in class.

Table 1 can help students plan their experiment. The table can also be downloaded from the Science in School websitew8.

Details of the experiment Your answer
Table 1: Planning your experiment
1 Formulate your hypothesis.
2 What is the biological basis of your hypothesis?
3 What is the dependent variable you want to measure in your experiment? How is it measured? In what units?
4 What is / are the independent variable(s) you want to change to study its / their effects on the variable in Step 3? How will you change it / them?
5 What are the fixed variables in the experiment – those that will not change?
6 Detail the controls you intend to include and explain their importance.

Next, the students should tabulate their experimental results and represent them graphically. They should consider the most appropriate type of graph to use (e.g. line graph or bar chart).

Below is an example of a project suitable for students in Grades 10-12 (aged 16-18). We used Azolla filiculoides, but any of the seven Azolla species will do. They can easily be obtained in plant nurseries or garden centres, aquarium shops or online.

The tip of the Mississippi
River Delta on 24 May 2010,
after the Deepwater Horizon
oil spill. Ribbons and patches
of oil are silver against the
light blue of the water;
vegetation is red

Image courtesy of NASA
Goddard Space Flight Center

The effect of Azolla on water quality

Hypothesis / research question: Azolla will lower water’s conductivity because the plant will absorb available metal ions. Does Azolla influence the water quality in other ways?

To test this hypothesis and answer the question, several parameters that indicate water quality will be monitored over the course of 2 weeks. Apart from measuring the conductivity, we also decided to investigate some aspects of water quality that were easy to test and for which the equipment was readily available.

Students should be familiar with basic plant physiology and the use of the instruments / methods.

  1. Pour 250 ml tap water into each of two glass containers, then place them on the window sill.
    Ideally, we would use contaminated water so that the plant can demonstrate its bioremediation, but this would not be safe. However, you could add metals from the school collection to a sample of tap water, and use this mixture.
  2. Measure your parameters in both containers.
  1. Polluted water
    Image courtesy of Chesapeake
    Bay Program; image source: Flickr

    To one of the containers, add about 50 g Azolla (add more if the plant is very wet). The second container should be left untreated. To extend the investigation, a third aquatic plant – one that does not absorb heavy metals, such as duckweed (Lemna spp.) – could be used in a third container.

  2. Repeat your measurements every 1-2 days.
    Alternatively, take samples every day and freeze them, then analyse them all at the end.

Do not add or change the water during the experiment.

Measurements

  1. Measure the conductivity using a conductivity meter to determine the concentration of electrolytes.
    Because metal ions are taken up by Azolla, the conductivity in the water should decrease over time.
  2. Measure the concentration of several specific ions. This can be done easily using commercial strip tests. We tested the nitrate and iron content because we had kits for them.
    Levels of iron should decrease over time as it is absorbed by Azolla, because it is an essential element for nitrogenase activity. If the iron supply is too low, Azolla fronds will turn yellow and wilt.Due to their symbiotic cyanobacteria, Azolla can live without a further source of nitrogen apart from the air, but the plant’s growth rate will drop. Thus a small decrease in nitrate levels in the water would be expected.
  1. Azolla pinnata
    Image courtesy of 澎湖小雲雀;
    image source: Flickr

    Measure the pH using either a pH meter or a strip test, to get an indication of the carbon dioxide (CO2) concentration. The plant’s cellular respiration should increase the concentration of CO2, lowering the pH.

  2. Measure the salinity (chlorine ion concentration) using a strip test.
    If the salinity increases, it should do so equally in both water samples – it will be the result of evaporation, because Azolla does not take up chlorine ions.

As a control, you could determine bacterial content by measuring turbidity with a spectrometer or turbidity meter, or by measuring the concentration of colony-forming units using the dilution method, seeding isolation, and counting colonies of bacteria on a rich agar medium. Differing levels of bacteria in the initial water samples may influence the water quality and could falsify results, as bacteria may also take up nutrients and metals.

Safety note

The cyanobacteria in Azolla produce a neurotoxin, so the plants should not be eaten. In addition, some Azolla species are considered a weed and are an invasive species in many countries, so the plants should be disposed of safely after use. See also the general safety note.


References

  • Arora A, Saxena S (2005) Phosphorus requirements of Azolla microphylla. International Rice Research Notes 30(2): 25-26.
  • Arora A, Saxena S, Kumar Sharma D (2006) Tolerance and phytoaccumulation of chromium by three Azolla species. World Journal of Microbiology and Biotechnology 22(2): 97-100. doi: 10.1007/s11274-005-9000-9
  • Cohen MF, Yamasaki H, Mazzola M (2004) Bioremediation of soils by plant-microbe systems. International Journal of Green Energy 1(3): 301-312. doi: 10.1081/GE-200033610
  • Pabby A, Prasana R, Singh PK (2004) Biological significance of Azolla and its utilization in agriculture. Proceedings of the Indian National Science Academy B70(3): 299-333. www.new.dli.ernet.in/rawdataupload/upload/insa/INSA_1/2000c954-299.pdf or use the direct link: http://tinyurl.com/62wq6mp
  • Wagner GM (1997) Azolla: A review of its biology and utilization. The Botanical Review 63(1):1-26. doi: 10.1007/BF02857915

Web References

Resources

  • The World Water Monitoring Day offers a number of resources in English and Spanish on how to monitor a range of water-quality parameters, as well as kits. See: www.worldwatermonitoringday.org
  • For further resources on testing water quality, see the website of Lifewater Canada: www.lifewater.ca/Section_16.htm
  • For downloadable water-testing manuals for schools, see the website of the Massachusetts Water Resources Authority (www.mwra.state.ma.us) or use the direct link: http://tinyurl.com/6jerkan
  • To learn about a school project to test water quality in the local environment, see:

Author(s)

Vered Yephlach-Wiskerman teaches biology at Omer High School in Omer, Israel. She is the Excellence Program Coordinator and a lecturer in biochemistry and immunology at the science department of the Kaye Academic College of Education, a professional training college for teachers in Beersheba.

Review

Keeping the environment clean and pollution free as well as monitoring the environment are now major concerns, and these subjects are studied in school science. Natural ways of cleaning up the environment, such as bioremediation by plants and microbes, are ideal and have been studied for many years. This article shows how a common aquatic plant, Azolla, can be used to demonstrate bioremediation in the classroom. The activities foster scientific thinking skills, an essential part of the ‘how science works’ element of the curriculum. A simplified version of this activity could be used with younger students.

The experiments could be linked to chemistry – in tests for cations and anions and titrations. The activity also has links to microbiology and biotechnology, as the students could learn the basics of how microbiological water quality can be monitored. As an extension activity, students could use the Internet find out how microbes can be used to clean up oil spills and how micro-organisms can be selected or genetically engineered to deal with particular contamination problems.

Shelley Goodman, UK

License

CC-BY-NC-SA